Product Support and Software Updates

Click here for the Product Support site (maintained by Hauppauge's technical support department) See below for a list of software updates for Hauppauge Products

Most of these files have been compressed with PKZIP to make them take less time to send. You need a copy of PKUNZIP to decompress them. Use the -d option on PKUNZIP!

The amount of time it will take to move them to your PC depends upon the speed of your modem and the load on our Internet Web server. We estimate that it normally takes one minute to send a 60K byte file; ten minutes for a 600K file; etc.

Board type:	Software name, version, date and size: Note: When unzipping these files, make sure you preserve the directory structure (or include original path)!
Celebrity and HighQ 32-bit support	32-bit Application version 2.00 disk 1(disk 1 of 2) 32-bit application for Windows 95 or Windows NT. When this application is run under WindowsNT, the "WinTV for Windows NT driver disk" needs to be installed. 1170K Updated May 1, 1996 32-bit Application version 2.00 disk 2 (disk 2 of 2) 800K WinTV for Windows NT driver Driver for Windows NT. Supports the WinTV-Celebrity, HighQ and CinemaPro boards. NEW! Easier installation! Based on WISE installer. Version 2.51 44K Updated Feb. 15, 1997 MCI driver for Windows NT Control the WinTV-Celebrity or HighQ using the Media Control Interface (MCI) Version 2.30 33K Updated May 9, 1996 WinTV-Celebrity manual in Acrobat PDF format 305K Updated Sept. 1998
WinTV-CinemaPro software	Application version 4.01 Improved installation under WindowsNT. Fixes problems found under Windows NT between CinemaPro and other 16-bit Plug-and-Play devices. Also fixes image save problems. Runs under Windows 3.1, Windows 95, Windows98 and Windows NT. To install, download this file. Then run CPR401.EXE This unpacks the installation program to a temporary directory, then launches the combination Application/driver installer. Note: This application runs under WindowsNT with driver version 2.51 or later (see below). Note: If you are using a Revision C CinemaPro, make sure the jumpers are in the "NT" position when running under NT 4.0! File name: CPR401.EXE File size: 2416K Updated April 9, 1999 WinTV for Windows NT driver Driver for Windows NT. Supports the WinTV-Celebrity, HighQ and CinemaPro boards. NEW! Easier installation! Based on WISE installer. Version 2.51 File size: 44K Updated Feb. 15, 1997 Application version 3.84.48 Fixes problems found under Windows NT between CinemaPro and other 16-bit Plug-and-Play devices. Also fixes image save problems. Runs under Windows 3.1, Windows 95, Windows98 and Windows NT. File size: 1040K Updated March 5, 1998 WinTV 32-bit CinemaPro application (disk 1) WinTV 32-bit CinemaPro application (disk 2) Application for second CinemaPro in a system For Windows 95 only. Based on CinemaPro application version 3.84.40 969K Updated Jan 3, 1997 MCI driver for CinemaPro 44K Updated Aug. 23, 1996 TV screen saver Copy this file into your Windows directory. Then go into Display Properties and the ScreenSaver and select TV Saver. WinTV-CinemaPro manual in Acrobat PDF format 305K Updated Sept. 1998
Voyager64 software	Application version 3.88.10 Application for Windows 95. size=1303K Updated 2/21/97 Voyager driver version 1.4C Windows 95 PnP driver version 1.4C size=421K Updated 2/21/97
WinTV-Prism software	Application version 3.83 Production release. Use PKUNZIP -d option. size=985K Updated 10/27/95 FCON.EXE This program turns on the feature connector on S3 Trio64 based VGA boards. size=6K
VtPlus Teletext software	VTPlus version 2.64 German language VTPlus version 2.64 French language VTPlus version 2.64 English language VTPlus for use with all European WinTV products. To install, download and run this program. After installation, VTPlus can be found in /ProgramFiles/VTPlus Version: 2.64 size=759K
WinTV-Cinema95 software	Application version 3.84 1100K FCON.EXE This program turns on the feature connector on S3 Trio64 based VGA boards. size=6K
WinTV-02 software	WinTV-02 Application and driver version 3.3 size=699K

Back to Home Page

Questions, comments, or problems regarding this service?

Copyright © 1998, 1999, 2000 Hauppauge Computer Works, Inc. All rights reserved.
The Hauppauge logo and WinTV are registered trademarks of Hauppauge Computer Works, Inc. Windows and WebTV are trademarks of Microsoft. Corp. Company logos are trademarks of their respective companies.