 |
Application and drivers for WindowsXP/Me/98/2000/NT/95
Note: if you have an 881 based WinTV PCI board, please go to our pages for 881 based WinTV's
Windows Drivers
for WindowsXP, Windows2000, WindowsMe and Windows98SE
Latest WDM driver for WinTV
| WinTV WDM driver version 3.37 WHQLd |
 |
WDM driver version 3.37_211163 WHQLed for WindowsXP only
WDM driver for use under Windows XP. WHQL logo tested for use under WindowsXP.
Note: Use the latest WinTV2000 application with this driver
Note: This driver will work with all WinTV PCI boards, except for the WinTV-D and WinTV-PVR's.
To install:
- Download this file to a temporary directory
- Run whql337_21163.exe. Halfway through the installation you will be asked to reboot. Do so to complete the installation.
- After rebooting, Windows will run the "New Hardware Wizard" automatically.
- Check the box which says "Install from a list or specific location". Click Next.
- Choose "Include this location in the search" This location should already be listed: C:\PROGRA~1\WinTV\whql Click Next to install.
Name: whql337_21163.exe
Version: 3.37 rev. 21163
Size: 1,121K
Updated: June 23, 2003
|
|
| WinTV WDM driver version 3.35 |
|
WDM driver version wdm335_21125.exe
for Windows XP, 98SE, 2000 and Windows Me
WDM driver for use under Windows98SE, WindowsMe and Windows2000. Also for use under WindowsXP.
Note: Use the latest WinTV2000 application with this driver
Note: This driver will work with all WinTV PCI boards, except for the WinTV-D and WinTV-PVR.
To install, download to a temporary directory and run wdm335_21125.exe. Halfway through the installation you will be asked to reboot. Do so to complete the installation.
Name: wdm335_21125.exe
Version: 3.35 rev. 21125
Size: 1.237K
Updated: May 5, 2003
|
Latest WinTV Applications
Note: the operation of WinTV under Windows requires two pieces: a WinTV driver (the WinTV driver is available above in "Driver" section) and a WinTV application. You cannot run the application without loading the driver.
|
| WinTV2000 application update |
|
WinTV2000 application version 4.3_22033
To install, copy this file to a temporary directory on your local disk. Then run wintv2k43_22033.exe, which will install the new WinTV2000 application.
|
|
| WinTV Radio application update |
|
WinTV Radio32 application version 1.52
To install, download to a temporary directory and run RADIO32.EXE
New features include 30 presets and local/distance reception. Also, name radio stations by creating a preset and then clicking on the freq display and typing in the string you want.
Click here to see instructions on using the new WinTV Radio32 application.
Name: radio32ver152_20311.exe
Version: 1.52
Size: 324K
Updated: Nov. 7, 2002
|
|
| WinTV Remote control application update |
|
IR Remote control version 2.35
Latest version the IR remote control software.
Also, now runs under Windows2000.
Name: ir32_235_2105.exe
Vesion: 2.35 release 21052
Updated: Feb. 21, 2003
|
|
Utilities
Common utilities for helping with your WinTV installation
 |
Clear all WinTV files and registry entries from your PC
This program removes all WinTV programs, driver files and registry entries. This is a handy program to use before reinstalling WinTV, or before installing a new model of WinTV.
To run this program, download into your C:\ directory . To run this file click on Start - Run. Then type in C:\HCWCLEAR Choose the option for total removal and click on OK. |
|
|
Technical FAQ
This is a list of Frequently Asked Questions about the WinTV and how to solve common problems. |
|
|
Get information on your WinTV
This program checks you WinTV board, and displays its model number, serial number, hardware configuration and software version installed. To run this program, download into your C:\ directory and run it . |
|
|
Capture test program
This program is a simple AVI capture program, which verifies that your WinTV can capture full motion video. To run this program, download into your C:\ directory and run it. |
WindowsNT 4.0 (VFW) support for WinTV
Latest Standard Mode (VFW) Applications and Drivers
Note: the operation of WinTV under WindowsNT requires two pieces: a WinTV driver and a WinTV application. You cannot run the application without loading the driver.
Go to WindowsNT Software Updates page
Latest Standard Mode (VFW) Applications and Drivers
for Windows95 and Windows98
Note: The WinTV-Theater and the WinTV-D board require this VFW driver and application.
Note: Some Windows applications require a VFW driver (Video for Windows). If so, you can use this driver and WinTV application under Windows98 and WindowsMe.
Latest Standard Mode (VFW) Driver
Note: the operation of WinTV under Windows requires two pieces: a WinTV driver and a WinTV application (the WinTV application is available below in "Latest WinTV Application" section). You cannot run the application without loading the driver.
|
WinTV driver version 4.2 |
|
Note: this driver unzips, removes an existing WinTV driver and installs the latest driver on one easy step.
Note: this driver is compatible with DirectX 8 or later in high color (16-bit) color modes or greater.
Note: this driver runs with the latest WinTV2000 application (see above).
Installation instructions:
- Download this file (WTVDRV42.EXE) and save it to a directory you will remember (for example: C:\)
- Run WTVDRV42.EXE. This will unpack the driver and start the driver installation.
- Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
- Download and install the WinTV application (see below).
Note: If you are having problems with this version of the driver under Windows98SE or WindowsMe, we have a beta driver which has better compatibility with some motherboards. Click here for this driver.
Name: WTVDRV42.EXE
Size: 2027K
Updated: July 25, 2001
|
|
|
| Latest WinTV Application |
|
WinTV2000 application version 4.0.21126 |
|
To install, copy this file to a temporary directory on your local disk. Then run wintv2k40_21126.exe, which is the installation program for the WinTV application.
New features: This version now includes integrated video clip and hi-resolution still image capture.
New features: This version now includes the WinTV32 and WinTV2000 applications.
Note: This application will run under WindowsXP, Windows98, Windows2000 and WindowsNT 4.0 with the appropriate driver.
Note: This version requires WinTV driver version 4.2 or later (see above).
Installation instructions:
- Download this file (wintv2k40_21126.exe) and save it to a directory you will remember (for example: C:\)
- Run wintv2k40_21126.exe. This will unpack the driver and start the driver installation.
Name: wintv2k40_21126.exe
Version: 4.00
Size: 2468K
Updated: June 9, 2003
|
|
Beta test versions
| WDM driver beta |
|
WinTV WDM driver version 3.39 |
|
Installation instructions:
- Download this file and save it to a directory you will remember (for example: C:\)
- Run the downloaded file. This will unpack the driver and start the driver installation.
- Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
- After the driver has been installed, you need to install the latest WinTV2000 applications.
Name: wdm339_22097.exe
Size: 2522K
Updated: April 8, 2004
|
|
| WinTV2000 application beta |
|
WinTV2000 application version 4.3_22075 |
|
Installation instructions:
- Download this file and save it to a directory you will remember (for example: C:\)
- Run the downloaded file. This will unpack the driver and start the driver installation
Name: wintv2k43_22075.exe
Size: 1560K
Updated: April 8, 2004
|
|
| IR remote control update |
|
IR remote control application version 2.35_21315 |
|
To install, copy this file to a temporary directory on your local disk. Then run ir32_235_21315.exe, which will install the new IR32 application. |
|
WinTV driver version 4.3 |
|
Note: This driver fixes problems with loss of color on S-Video source.
Note: This driver has improved compatibility with certain motherboards, including ALi. If you are using ALi motherboards, we recommend getting the latest ALi AGP Driver (version 1.82): It was developed to improve system stability with TV cards.
Also with ALi motherboards, set 'PCI Latency' in the BIOS to 10: some systems may have problems at any greater setting (i.e. 16,32, etc.).
If you get bad horizontal lines (with movement) when used with the Soundblaster Live Player 5.1., enable 'Delay Transaction' in the BIOS or using another soundcard will eliminate the line problem.
Installation instructions:
- Download this file (WTVDRV43_19301.EXE) and save it to a directory you will remember (for example: C:\)
- Run WTVDRV43_19301.EXE. This will unpack the driver and start the driver installation.
- Halfway through the installation you will be asked to Reboot. Do so to continue the driver installation.
- After the driver has been installed, you need to install the latest WinTV2000 application with the new video formats.
Download the WinTV application wintv2k40_21126.exe and save it to a directory you will remember (for example: C:\)
Run wintv2k40_21126.exe. This will install the updated WinTV2000 application. There is no need to reboot after this.
Name: WTVDRV43_19301.EXE
Size: 2029K
Updated: November 2, 2001
|
|
Accessories
| WinTV Scheduler |
|
TV Scheduler version 1.07.21034
Schedule your TV recording.
This version now supports the new enhanced TitanTV, the web based schedule of TV programs. To use TitanTV to schedule your TV recordings, click on the "TitanTV" icon on your Windows desktop.
You need an internet connection to use TitanTV.com
Name: sched107_21034.exe
Size: 3500K
Updated: March 2, 2003
|
|
|
|
Record your TV shows to hard disk using the WinTV MPEG1 recorder version 1.1.12
This audio/video recorder works on all WinTV-pci boards, and uses MPEG1 compression to save your TV shows to your PC's hard disk. The compression is done in software, so you need a 500MHz Pentium processor or faster. There is no channel changing capability in this first version of the recorder, so set your channel before you run it.
Important: this recorder requires a 500MHz Pentium II minimum for operation.
Date: June 15, 2001
Version: 1.1.12
Size: 2932K
|
|
|
Audio Recorder for WinTV
Use the WinTV to create Wave or MP3 files from the TV shows you are watching or from FM radio you are listening to (on WinTV models equiped with FM radio).
This is a free demo version. The unlimited use version is sold on our WebStore for $9.95
Note: the WinTV Audio Recorder requires a WinTV board or a WinTV-USB to be installed in your PC to operate.
Click here to see the product page.
Date: July 7, 2001
Version: 2.3.3
Size: 2864K
|
|
|
WinTV OCX developers kit version 2.0
Develop your own application which uses the WinTV to display or capture video images with our OCX toolkit!
Note: this file includes functions such as video region selection, source, etc. It contains an ActiveX TV control, plus VB, C++, and Web page examples, and requires VB6 Runtime be installed on your machine.
Name: wintvocx20_19337.exe
Updated: Aug. 16, 2001
Size: 1630K |
|
|
Time lapse Capture version 1.4
Capture still images on a periodic basis from the WinTV, with SnapShot running.
Our thanks to Matt Donegan for this little gem!
Date: Nov. 10, 1999
Version: 1.4
Size: 72K
|
|
|
VtPlus Teletext software
VTPlus version 2.64 German language
VTPlus version 2.64 French language
VTPlus version 2.64 English language
VTPlus for use with all European WinTV products.
To install, download and run this program. After installation, VTPlus can be found in /ProgramFiles/VTPlus
Version: 2.64
Size: 759K |
|
3rd Party Software
|
DScaler website
Hauppauge uses parts of the Descaler technology in our latest WDM drivers to provide a better TV picture from our WinTV PCI boards. We are grateful to the DScaler team for providing us with their de-interlacing routines.
You can get a fully functioning open-source DScaler application which aims to supply the best possible picture from your Hauppauge WinTV PCI board. At this time DScaler does not fully support the onboard tuners of our cards but works extremely well if you are using external sources such as laserdisc or DSS.
Note: This application is not recommended for PC novices. See the DScaler website (http://www.dscaler.org/) for more details and to download DScaler.
|
|
|
SnapStream Beyond TV™ 3: Networked Personal Television for your WinTV
[evaluation copy: free download]
SnapStream Beyond TV™ 3 (previously Personal Video Station) gives the Hauppauge WinTV users the best networked personal television experience.
- No subscription fees EVER!
- Never miss your favorite show - record single episodes, all episodes or all new episodes
- Watch videos anywhere on your home network and on the road
- Enjoy the FREE integrated program guide
- Schedule online - use any web-enabled device to schedule recordings, even when you aren't at home!
- Use SmartSkip™ to create "chapters" that allow you to skip commercials and other parts of TV shows
- Watch Live TV - Pause, skip ahead 30 seconds, use instant replay and rewind/fast forward at up to 60x speed!
- Shrink files with ShowSqueeze™ - copy and replay on a laptop or other portable devices
- Download a FREE evaluation copy today!
Hardware Requirements for BeyondTV 3:
WinTV-PVR with hardware MPEG encoder: Intel Celeron® or AMD Athlon 600 MHz and above
WinTV without hardware MPEG encoder: Intel Pentium 4® or AMD Athlon 1.4 GHz and above
|
|
|
Viewtopia
Viewtopia supports generalized application capture in as many as 4 sub windows , which means e-mail and other productivity tools such as Microsoft Word and Excel can reside on a single screen simultaneously.
Viewtopia can save multiple-page layouts of any configuration as easy as saving a bookmark.
Viewtopia supports Auto-type, a patent pending feature for quick typing of a URL without having to click in a URL bar.
Viewtopia supports Auto-refresh of each browser window independently.
Video Stream broadcast (cable, satellite, etc.) can occupy a variable size sub-window. Windows Media player, Real Player, Quick Time and other multimedia programs work similarly.
Viewtopia is very useful for searching, the program is designed to continue to grow in this direction.
|
|
|
Linux drivers, applications and LinuxTV
The Linux driver for the WinTV card is now part of the Linux kernel (version 2.2 and newer).
The LinuxTV web site is at www.linuxtv.org/
To see some notes from a Linux user on his WinTV installation, click here.
New Linux developments on the bttv driver for the WinTV can be found here
Click here for the Hauppauge Linux help page for SuSE and Red Hat Linux
To use teletext under Linux, use Martin Buck's VideoText for Linux |
|
|
FreeBSD / NetBSD / OpenBSD / BSDi Driver and Applications
The driver for the WinTV card is part of the FreeBSD kernel. It has also been ported to OpenBSD, NetBSD and BSDi operating systems.
The latest driver and install instructions can be found at:
http://telepresence.dmem.strath.ac.uk/bt848
and is maintained by Roger Hardiman.
The FreeBSD Ports Collection also includes the following programs for the WinTV which can also be installed as binary packages with the sysinstall program.
FXTV A TV Tuner and video capture program
xmradio A Radio tuner for cards with FM Radio
VideoteXt Martin Buck's VideoteXt Teletext program
AleVT Edgar Toernig's Teletext program |
|
|
BeOS support for the WinTV
BeOS now ships with production-quality Hauppauge WinTV drivers. |
|
Technical notes and tips on using WinTV
|
